Huawei E5186 Quick Start Manual page 10

Note:
Use the provided power adapter. Use of an incompatible power adapter or one from an
unknown manufacturer may cause the CPE to malfunction, fail, or could even cause a fire.
Such use voids all warranties, whether expressed or implied, on the product.
The CPE's power adapter model is HW-120200XYW. X and Y represent letters or
numbers that vary by region. For details about the specific adapter model, contact an
authorized dealer.
Logging In to the Web Management Page
The web-based configuration utility can be used for initial CPE installation, parameter
configuration, and function management through the browser.
The Windows 7 operating system and Internet Explorer 8.0 are used as an example. Ensure that
the CPE is connected to the computer. Follow these steps to log in to the web management page:
1. Connect CPE cables.
2. Configure the computer's IP address so that the IP addresses of the computer and the CPE
are in the same network segment.
Note:
On the back of the router is a label with information that you will need.
Make sure Wireless Network is activated on your computer.
Your computer will discover any available wireless networks. Select
your network name (WLAN – Name) from the list which is displayed
where you select a network connection.
When prompted, enter your security key (WLAN – Key).
You are done when you can see on your computer that you are
9