Shared Folder - Linksys E3000 User Manual

Linksys E3000
Return to Upper Folder To move back up a folder level,
select this option .
Current Folder
The current folder is displayed .
Folder Name
The available folders are listed by Folder
Name .
Enter into Folder To display subfolders, click this button .
Select Select a folder .
Return to Upper Folder To go back up a folder level from
a subfolder, click this button .
Access
Specify which user groups have read-and-write or read-
only access to the folder . (To create user groups, refer to
Create or Edit a Group Account, page 32 .)
Available Groups
To allow a group access to the folder,
select it, and then click the >> button .
Groups with Access To block a group from accessing the
folder, select it, and then click the << button .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes . Click Close to exit the
screen .

Shared Folder

Shared Disk IP Address
The IP address of the disk is
displayed .
Summary To view a list of shared folders, click this option .
For each shared folder, the Display Name, Partition, and
Shared Folder location are displayed .
Edit
To change the access settings of a shared folder, click
this option, and the Shared Folder screen appears .
High Performance Wireless-N Router
Chapter 3: Advanced Configuration
Shared Folder > Edit
Use this screen to edit a shared folder .
Shared Folder
Display Name Create a name for the folder . This will
appear in the Shared Folder table on the Disk screen .
Partition
The name of the partition is displayed .
Location
The location of the current folder is displayed .
New Folder
Type in a new folder name if you want to
create a new subfolder in the current location . Then click
Create .
Share entire Partition Select this option if you want
to share the entire partition . If your disk doesn't have
multiple partitions, selecting this option will share the
entire disk . If you do not want to share the entire partition,
then select the folder you do want to share .
Current Folder
The current folder is displayed .
Folder Name
The available folders are listed by Folder
Name .
Enter into Folder To display subfolders, click this button .
Select Select a folder .
Return to Upper Folder To go back up a folder level from
a subfolder, click this button .
Access
Specify which user groups have read-and-write or read-
only access to the folder . (To create user groups, refer to
Create or Edit a Group Account, page 32 .)
Available Groups
To allow a group access to the folder,
select it, and then click the >> button .
Groups with Access To block a group from accessing the
folder, select it, and then click the << button .
28