Linksys E3000 Manual
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Wireless Router
  5. E3000
  6. Manual

Linksys E3000 Manual

Hide thumbs Also See for E3000:
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
Contents
•
1 Hardware Specifications
•
•
•
♦
♦
♦
•
•
•
•
•
Hardware Specifications
Characteristic
CPU
Broadcom BCM4718
CPU Speed
480 MHz
Flash ROM
8 MB
RAM
64 MB
Radios
2.4 GHz, 5 GHz
WLAN Support
a/b/g/n
WLAN Max Speed 300 Mbps
Antenna Location
Internal
Switch
4x GigE + 1 WAN
USB
1x USB 2.0
Hardware Specifications
Linksys_E3000
Value
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Linksys E3000

Summary of Contents for Linksys E3000

  • Page 1: Table Of Contents

    Linksys_E3000 Contents • 1 Hardware Specifications • 2 Output Power • 3 Initial Flash • 4 Upgrade in DD-WRT 4.1 e2k-e3k and ♦ nv60k ♦ 4.2 Kong Build ♦ 4.3 K3.x upgrade • 5 Build Information 6 Useful Tips • •...

  • Page 2: Output Power

    Linksys_E3000 Output Power You can use these figures to come up with what Tx power would be best for you. As factory lists it at a max of 20dBm, then a setting of 100mW could be used as 20dBm = 100mW, 17dBm = 50mW, and so on. 2.4GHz output power per TX chain 802.11b: Max.

  • Page 3: Upgrade In Dd-Wrt

    If running an E3000.bin build since svn16772, you can upgrade using E3000 (trailed) or nv60k builds • See Where do I download firmware? for links. To flash an nv60k build (that replaces e2k-e3k), you must flash a trailed E3000 build from svn16773 or later before nv60k. Do not flash directly from e2k-e3k to nv60k! ♦...

  • Page 4: Kong Build

    16995 is the last dd-wrt build with upgrade files of e2k-e3k type, all upgrading thereafter is done with -nv60k type files. Kong Build Kong 22000++ is a stable, reliable, recommended large build for the E3000 without the Heartbleed vulnerability. You can (only) upgrade to Kong from DD-WRT. (There are no trialed Kong builds.) Two versions are available: •...

  • Page 5: Build Information

    Printer Sharing gives a general description how to configure the router to connect a printer on the USB port. However it describes too much and things that are not needed or even not working for the E3000 router. Following procedure works with firmware DD-WRT v24-sp2 (12/24/10) mega, the latest version at the moment of writing.
  • Page 6 Linksys_E3000 • Connect your printer to the router • Reboot the router via Administration, Reboot Router Via an ssh client (for example putty under Windows) connect via SSH on port 22 to the router: • login as: root • password: <your password that you use to login to the web interface> •...

  • Page 7: Reverting Back To Stock Firmware

    Reverting back to stock firmware To revert back to stock firmware download the latest E3000 firmware from linksys site, reset you router to defaults from within dd-wrt's webgui, wait, then login and select the stock firmware file and flash, make sure to select "reset to defaults"...

Table of Contents