Subscribe to Our Youtube Channel
Related Manuals for MKS SG 1024
Summary of Contents for MKS SG 1024
- Page 1 SG 1024 SOLID STATE MICROWAVE GENERATOR 1000 W @ 2450 MHZ TECHNICAL NOTE (issue: April 2017)
- Page 2 (Cover Rear)
-
Page 3: Ce Declaration
Electromagnetic comp. - Testing & measuring technique: immunity to conducted disturbance Compatibilità elettromagnetica - Tecnica di prova e misura: immunità disturbi condotti RF Reggio Emilia, April 2017 Marco Garuti - Gen Manager File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 1 of 16... -
Page 4: Rohs Conformity
Date File Draft internal reference November 2015 SG1024_draft First emission September 2016 SG1024_r0 Updated norms & RoHS compliance. 1 kW full scale power. April 2017 SG1024_r1 page 2 of 16 File: SG1024_r1eng - April 2017 - Technical note: SG 1024... -
Page 5: Table Of Contents
Working modes sible for checking and using the equipment, as well as the risk of general malfunctions of the equipment itself. File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 3 of 16... -
Page 6: General Description
Handling Warnings SG 1024 Versions Overview The SG 1024 has two handles on the front panel to help DISPLAY unpacking and handling operations: never use only the MODEL ABBREV. handles to lift the equipment but support the weight with Version no. -
Page 7: Equipment Installation
In case of shipping, package with the original package or use File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 5 of 16... -
Page 8: Environmental Conditions
Wiring instructions perly connected it, (look at the chapter “Wiring Instruction” for any doubt) then power on the unit through your external The SG 1024 must be installed and serviced only by quali- contactor. fied personnel acquainted with the regulations covering the Once switched OFF wait at least two seconds before setting it application. -
Page 9: Bit Alarm Table
4 bit outputs provided on CONN #5 (see the relevant schema- tic at page 12). The following is the table with the indication of the codes. The behavior of the SG 1024 depends on its “working status”: it has several statuses with different meaning and functiona- lity. The logic flow of these statuses is showed on the next... -
Page 10: Firmware Upgrade
If no new code is loaded within 2 seconds, the previously stored one is run. To upload a new program through the bootloader, simply connect the SG 1024 USB port to the PC USB port. The first time you must install the USB driver through Windows Update. During this operation the unit has to be switched OFF. -
Page 11: Manual Commands
SG 1024 PM 250 Manual commands (for vers. 2 “Display”) The SG 1024 version 2 (Display version) can also be opera- ted manually via the front panel commands. Some of the SG 1024’s parameters can only be modified through the panel commands. The status of the equipment and all the relevant information can be seen on the graphic display. - Page 12 The unique given conditions to reach point “A” are damaged. page 10 of 16 File: SG1024_r1eng - April 2017 - Technical note: SG 1024...
-
Page 13: Conn.# 1 Wiring
@ 2450 MHz 2.450 MHz Jacket mm [“] multiple bends, mm [“] RF5012 0.121 0.63 kW 13.8 [0.54] 125 [5] RF5078 0.069 1.30 kW 27.5 [1.08] 254 [10] File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 11 of 16... -
Page 14: Conn.# 2 Wiring
Forward Power W Pin no. 2 (return on pin #15) : 1 V = 100 W (TBD) Reverse Power W Pin no. 3 (return on pin #16) page 12 of 16 File: SG1024_r1eng - April 2017 - Technical note: SG 1024... -
Page 15: Conn. Fielbus
Anybus Compact Com section, or ask our Application Note for the protocol implemented. Address switches & connector layout Each SG 1024 generator must be associated to an address: the two digital rotating switches must be used, the left switch sets the tens, the right sets the units. -
Page 16: Components Layout
IGM22061192003M1 Lever Solid state power amplifier 1 kW 80SG10244 Heatsink bar 462772006 Fitting, quick-lock type, 1/4 male straight (CBI Staubli) PNCB1067151 Plug: PNCBI061810 (*) (*)mating plug for quick-lock fitting must be ordered separately Note: page 14 of 16 File: SG1024_r1eng - April 2017 - Technical note: SG 1024... -
Page 17: Alarm Troubleshooting
Note*: the last alarm occured is permanently stored by the CPU, even in absence of main line, and can be verified using the Front Panel software (vers. 7.50 and over) File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 15 of 16... -
Page 18: How To Order
PNCBI061810 (Staubli type: CBI 061810/IA/JV/CN) MKS Alter reserves the right to improve or modify this products, at any time, without obligation to notify any person or entity of such changes. No part of this publication may be reproduced without the express writ- ten consent of MKS All rights reserved.
Need help?
Do you have a question about the SG 1024 and is the answer not in the manual?
Questions and answers