Plasma PS-501TX Quick Start Manual

【Installation Notes】
1. Install according to the actual environment.
2. Adjust the number of ions according to the actual environment.
3. Connect the external power supply to DC12V and turn on, the main switch is on
the side of the machine, open The switch indicator lights up, indicating that the
machine has entered operation and the fan is working. Air volume, 128m³/h.
（1）No punching steps：
Label position Punch
165mm
1.Mark the location of 2.Percussion drilling,
the hole punch. hole diameter 6mm.
Do not run out of screws Plug in the power cord
4.Screw the expansion 5. Plug in the power
plugWire, set aside 5 mm cord first.
（2）Disassembly cleaning steps:
PUSH
2. Push down the back
1. Screw the screws on
the side of the product of the product,It can
Down.
be separated.
Product
Name
Expansion rubber plug Purchase
Time
Customer
information
3.Put the rubber plug.
Sales company stamp：
Hang on the wall
Hang
6.Then hang the product
on the wall.
3. Unscrew the screw
After that, you can
remove the filter.
Warranty Card
（Please keep it properly）
Product
Number
Contact
Number
Name/company
contact address
Plasma Ions
Plasma Air Disinfection Purifier
Model: PS-501TX
Please
read
the
instructions
before
use