Page 1
® Users’ Manual SPED II Spinal Protection Extrication Device FERNO/MAN/0721/215-R2/UK Stock Code 2003-0147 Read and retain this Manual for future reference...
Page 2
Limited Warranty Statement The products sold by Ferno are covered by a limited warranty, which is printed on all Ferno invoices. The complete terms and conditions of the limited warranty, and the limitations of liability and disclaimers, are also available upon request by calling Ferno UK on +44 (0) 1274 851999.
1.4 Safety Labels Improper parts and service can cause injury. Labels place important information from the Users’ Manual on Use only Ferno approved parts and service on the stretcher. Read and follow label instructions. Replace worn the SPED. or damaged labels immediately. The product information label is affixed to the middle carry handle and contains important information regarding the unit and date of manufacture.
® SPED II Spinal Protection Extrication Device 2 - OPERATOR SKILLS AND TRAINING 2.1 Skills 2.2 Training 1. Operators using the SPED need: Trainees need to: • A working knowledge of emergency patient-handling • Follow a training program designed or approved by procedures.
® SPED II Spinal Protection Extrication Device 3 - ABOUT SPED II 3.1 Description 3.3 General Specifications The SPED II Spinal Protection Extrication Device (referred Part Number 23005001001 to as the SPED throughout this manual) is designed for the Length...
® SPED II Spinal Protection Extrication Device 4 - GUIDELINES FOR USE protocols, applicable to the situation. Using the SPED requires a minimum of two trained operators. In most Motorsport situations, operators Personnel using the SPED in high-angle environments will want or need additional help.
® SPED II Spinal Protection Extrication Device 5.5 Manually lifting a casualty 5.7 Returning the Strapping System after use Refer to local protocols and guidelines regarding manual One of the most important protocols is once the SPED handling and lifting of persons or objects. The SPED is fitted with five carry handles.
1. Hand wash the SPED in warm water with a mild soap inspection manual for this device. (Ferno recommend Rope & Harness Wash). Once stains are removed, rinse in clear water. DO NOT use excessive force or abrasive items in the cleaning process. Do not use cleaners that contain bleach, phenolics or iodines.
This limited warranty applies when you use and care for the product properly. If the product is not used and cared for properly, the warranty is void. The warranty period begins the day the product is shipped from Ferno or the day you receive it if you have proof of the delivery date.