Nitsuko TX Series User Manual page 79

To set DND message that edited by Message Edit Mode:
1. Press TRFR and FLASH.
2. Edit message by Message Edit Mode.
3. Press FLASH and
To cancel message on the telephone:
1. Press CLEAR.
To activate/cancel previous message (last time you set message for DND):
1. Press TRFR and
− When DND message is activated, DND flashes intermittently.
Related System Data:
Not applicable.
Leave Message with MW
Description:
When an extension user makes an intercom call to display phone and receives a busy
signal or no answer, this user can leave a text message with Message Wait (MW).
Station Application:
KTS with LCD
Operation:
To leave a Message:
1. Place intercom. Busy or no answer.
2. Dial 0. MW flashes intermittently as confirmation.
− Display shows "LEAVE MESSAGE?", then you can enter a message. If you
replace handset after this step operation, it is simple message waiting procedure.
3. Dial .
4. Dial message number (00-49), dial
Or
Press One-touch key No.1 or No.2 for personal message, then dial .
Or
Press FLASH, edit a message by Message Edit Mode, then press FLASH again and
dial .
− A text message is left on called display phone.
. DND flashes intermittently as confirmation.
.
.