Table of Contents
Advertisement
7.1. Sub-function Table
F1: Cutter service
Button
CUT
STOP
F 3: Label memory
Function
Load label setting:
B1
Save label setting:
B2
F 5: System setup
Function
View system status:
C1
power up status. Status 0 indicates pass, any non-zero implies
some error occurred and will cause machine work improperly
or lock. Please send this code to manufacturer for further
investigation.
Select language:
C2
Push this button will toggle the cutting blade to the highest and lowest
position for mechanical cutting blade adjustment.
Push this button will exit the cutter service mode and return to previous
mode.
Display / Description
Retrieve Saved label setting from memory address
Label setting: label length, label width, length after fold.
Maximum 10 address location.
Save label setting to memory address.
Label setting: label length, label width, length after fold.
Maximum 10 address location.
Display / Description
Display Main board and 3 motor boards current status.
Information includes each board's software version and
Change display language.
1 = English
2 = Traditional Chinese
©
AMC AUTOMATION CO.
Usage
P.10
Default value
1
1
Default Value
NA
1
Advertisement
Table of Contents
