Advertisement
Step 4: Kneepad Assembly
Locate the Kneepad and the Kneepad Post. Align the Kneepad Post with the
four holes on the Kneepad. Place a washer on the Kneepad Bolt and then put
a bolt into each hole and tighten with the provided allen wrench (Left Photo).
Once the Kneepad is assembled, insert the Kneepad Post into the hole on the
scooter frame and set to proper height. You should set the Kneepad to the
height where your leg will be at a 90 degree angle while standing straight with
the leg on the ground. Insert the Kneepad Locking Pin once you have the
Kneepad set to the proper height (Middle Photo). Apply the clamp to secure the
Kneepad (Right Photo).
Step5: Basket Assembly
Locate the Basket and Basket Frame. Apply the velcro straps around the Basket
Frame (Left Photo). Align the pins of the Basket Frame into the holes on the
Basket Bracket and lock into place (Middle and Right Photos).
Advertisement
