Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for silentgliss 5100 Autoglide
Summary of Contents for silentgliss 5100 Autoglide
- Page 1 Provided by www.discountelectriccurtains.co.uk Silent Gliss 5100 Autoglide Quick Start Guide...
- Page 2 1. 5100 Autoglide - System Options 5100B – Base System 5100B standard control with radio wall switch, comprising of : Motor 5190 Wall switch 10949 5100R - Remote System 5100R can be controlled by wall switch or remote control handset comprising of :...
- Page 3 5100T - Timer System 5100T can be controlled by wall switch or timer unit comprising of : Motor 5190 Wall Switch 10949 Timer 11092 5100TC - Total Control System 5100TC can be controlled by wall switch, remote handset or Timer unit comprising of : Motor 5190 Wall Switch 10949 Handset 10946...
- Page 4 2. Setting the Limits (end positions) Pull curtain in one direction for 15 cm and then let go Curtain moves in this direction until the LED blinks three times blue First end position is set 1. Pull curtain in other direction for 15 cm and then let go 2.
- Page 5 8. LED flashes 3 x blue Please note your 5100 Autoglide is equipped with touch and go and manual override. Now the limits are set it is possible to operate the curtains by simply pulling the leading edge of either curtain 15 cm in the desired direction, the curtain will then move to the limit in that direction.
- Page 6 1. Push programming button with a pin for 1 sec 2. LED blinks red 3. Please follow the steps below on the wall switch within the next 10 seconds 1. Press UP on wall switch On the wall switch 2. LED on motor blinks 3 times blue 3.
- Page 7 Push programming button with a pin for 1 sec. LED blinks red Please follow the steps below on the handset within the next 10 seconds On Handset 10946 1. Press UP on handset 2. LED on motor blinks 3 times blue 3.
- Page 8 . To Activate timer press power button on On Motor Push programming button with a pin for 1 sec LED blinks red Please follow the steps below on the timer within the next 10 seconds whilst the red light is blinking. On Timer step - 2 The flashing red LED on the motor will now stop.
- Page 9 Note Screen Display and button functions Please see on the following pages for the initial set-up instructions for the of timer for the following functions The clock, time and day Timer point set-up for setting the automatic open and close times.
- Page 10 Clock, time / day setting sequence To set the clock time / day settings follow detailed step by step instructions below. Clock, time / day setting instructions When setting the hour, minute and day during the programming process, moving to the next function means the last information in the previous function is remembered.
- Page 11 Timer operation overview (11092 single channel timer) The 11092 Single channel timer has 14 timer points for setting the automatic open and close operations of the curtain track – the individual timer points are named - A,B,C,E,F,G,H,I,J,L,O,P,S, and U. Each of the points are individually programmable – however not all timer points need to be programmed so can be either switched on or left off.
- Page 13 Timer point setting, 1 time set-up (time point A as per example 1 in table on previous page). Sunday to Saturday 07.30 Open Note: When setting the timer points during the programming process, moving to the next function means the last information in the previous function is remembered. Press for 3 seconds to unlock the screen (ensure the screen unlocks before moving to the next step) padlock symbol disappears, the no.1 appears top left.
- Page 14 Optional On Motor 5100T - Timer – 11093 1. To Activate timer press power button on rear of unit approx. 1 sec with a pin. Push programming button with a pin for 1 sec LED blinks red Please follow the steps below on the timer within the next 10 seconds.
- Page 15 Timer operation overview (11093 multi-channel timer) The 11093 multi-channel timer is supplied with 8 timer points for setting the automatic open and close operations of the curtain track – the individual timer points are identified as – 1, 2, 3, 4, 5, 6, 7, and 8. The timer also has 16 channels which can be assigned to individual or multiple motors, and applied to the timer points above.
- Page 16 Time point setting sequence...
- Page 17 Timer point setting instructions, 1 time set-up (time point A as per example 1 in table on previous page) Note: When setting the timer points during the programming process, moving to the next function means the last information in the previous function is remembered. Press for 3 seconds to unlock the screen (ensure the screen unlocks before moving to the next step) padlock symbol disappears, the no.1 appears top left.
-
Page 18: Troubleshooting
The 5100T uses each method of control Wall Plate, Handset and Timer, to assign each please follow the steps as per the instructions above for each unit. Trouble shooting Possible fault Possible cause Solution When plugged in the motor will Ensure the plug is wired not respond correctly, check power is at the...
Need help?
Do you have a question about the 5100 Autoglide and is the answer not in the manual?
Questions and answers