Advertisement
Guarantee
(UK only) This amplifier is guaranteed by your
dealer or reseller for 12 months from the date of
purchase
for
parts
shipping. Valves are consumables and therefore
on a 12 months pro-rata wear basis.
Other countries may vary, ask your re-seller.
Please keep your receipt as proof of purchase,
this may be needed.
In the event of any difficulty you are welcome to
contact us.
Exclusions
Claims for any damage to either amplifiers or valves
must be reported within three days of receipt.
This amplifier is designed for normal domestic hi fi
use. It is not guaranteed for commercial, Public
Address use, or use in other situations. The
guarantee becomes void if the unit has been
modified in any way not approved by Icon Audio.
Future service and spares
Your dealer should be able to provide any support
you need. Or you are welcome to contact for advice,
spares and repairs.
We expect our amplifiers to give a service life of
approximately 20 years, with regular maintenance.
During this time we will make every effort to supply
spare parts and repair them at an economical cost.
Supply is subject to availability from third party
suppliers which Icon Audio is not responsible for.
This does not cover unique parts including remote
control systems, meters and cosmetic parts.
If you believe the unit is not functioning correctly, it
may be helpful to contact us first as we may be able
Gen 28/03/2022
and
labour,
excluding
icon Audio
351 Aylestone Road Leicester LE2 8TA
Email: sales@iconaudio.com www.iconaudio.com
Phone +44 (0) 116 244 0593 +44 (0) 7787 158791
to assist you. Then we would request that you return
the item to us for further action.
You are advised to inform us of any change of
address in order that we may keep you up to date of
any upgrades or improvements. Check our website.
Returning for service
Should your amplifier need service in the UK return it
to the address below with a description of the
problem.
Outside the UK contact your dealer/distributor. In
case of difficulty email us at the address below.
8 Packing Instructions
It is essential that the original box and packing be
kept in good condition, as this provides vital
protection during transit. Please do not write on
box, but use removable labels. If returning for
service do not send the cover, as this is easily
damaged. The valve cover is normally supplied in a
separate box with the valves. We recommend that
the cover be sent separately as rough handling
can damage both cover and amplifier.
Re-use the supplied plastic bag to keep the
amp clean and free from damp.
The mains lead and remote control fits in a
foam cut-out underneath the amplifier.
Valves should be removed, numbered and
packed in "Bubblewrap" or similar for
protection inside the valve cover.
If the amplifier is stored in the box, keep
upright and remove batteries from remote
control to prevent corrosion.
(UK) Ltd
Page 9
Advertisement
