Metropolitan Industries StormPro 2100-DC Operation Manual

StormPro 2100-DC
Heavy Duty 12V DC Pump
Heavy Duty
12V DC Pump
Important Safety
Instructions
READ AND SAVE THESE
- THIS MANUAL CONTAINS
INSTRUCTIONS
FAILURE TO HEED SAFETY INSTRUCTIONS
AND WARNINGS COULD RESULT IN INJURY OR
DEATH
•
Read all the instructions before installing or
using the StormPro 2100-DC. Always disconnect
batteries and disconnect StormPro 2100-DC from
the AC power source before storing, handling, or
making any adjustments to the unit.
•
Use StormPro 2100-DC only as described in this
manual. Any other use not recommended by the
manufacturer may cause ire, electric shock, or
injury to persons.
•
Do not sit or stand on StormPro 2100-DC. Keep
children away.
•
Do not place objects on StormPro 2100-DC or
allow vents to become blocked.
•
Do not smoke, use sparkable electrical devices,
or open lame when working on this unit!
•
Do not install StormPro 2100-DC in locations
classiied as hazardous per N.E.C., ANSIINFPA
70 - 1984.
OPERATION MANUAL
Dated: 04/24/08
Supersedes: 02/04/08
Document No.: SP2100-OM
•
This unit has not been evaluated for use outdoors
- Never operate StormPro 2100-DC outdoors.
•
Never operate StormPro 2100-DC with battery
enclosure open.
•
Never operate StormPro 2100-DC in a wet
location.
•
Never operate StormPro 2100-DC in a location
where liquid or moisture will come in contact with,
splash on, or drip on unit.
•
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause
electric shock, and/or a ire hazard.
INSTRUCTION
IMPORTANT
In the event of a short circuit, grounding reduces
the risk of shock by providing an escape wire for the
electrical current. The StormPro 2100-DC must be
properly grounded.
The StormPro 2100-DC is equipped with a
cord having a grounding wire with an appropriate
grounding plug. The plug must be used with an outlet
that has been installed and grounded in accordance
with all local codes and ordinances. The outlet must
be the same coniguration as the plug. Where a two-
prong wall outlet is encountered, it must be replaced;
contact a qualiied electrician. To reduce the risk of
electric shock, the grounding plug must not be cut off
the plug. Do not use the three-prong plug with a two-
prong adapter. DO NOT attempt to defeat this safety
feature.
Use the StormPro 2100-DC only with adequate
wiring that is up to code. Connect to properly grounded
outlets only.
The StormPro 2100-DC is capable of and intended
to generate electrical current when unplugged from
the wall outlet or when the AC power is shut off.
Metropolitan Industries, Inc.
www.metropolitanind.com
Page 1 of 7
WARNING: ELECTRICAL
HAZARD
WARNING: RISK OF ELECTRICAL
SHOCK
WARNING: RISK OF ELECTRICAL
SHOCK
SHOCK