Metropolitan Industries ion Take Control MSE50V Operation Manual

Advertisement

Ion Technologies MSE50V
Sewage Pump
S
W
afety
arningS
Thank you for purchasing your Ion Technologies
Pump. To help ensure years of trouble-free operation,
please read the following manual carefully.
CAUTION/ WARNING: Read these safety
warnings first before installing, servicing, or
operating any pump.
DANGER: Keep pump equipment out of
the reach of children! Failure to follow the
directions given could cause serious risk to individuals
or objects.
Before Installation
This manual contains important information for the safe
use of this product. Read this manual completely and
follow the instructions carefully. Reasonable care and
safe methods relating to the installation and operation
of this product should be practiced. Check local codes
and requirements before installation.
2 YEAR
WARRANTY
EXTENSION
www.ionproducts.net
2 Year Warranty Extension Available
Add an additional 2 years to the standard 1 year warranty
(from date of installation) for a total of 3 years of
complete warranty protection.
For more information, visit
store.ionproducts.net/product/m33v-50v-warranty-extension
OPERATION MANUAL
Dated: 03/30/2020
Document Name: MSE50V_OM
WARNING: Risk Bronze/brass fitted pumps
may contain lead levels higher than considered
safe for potable water systems. Government agencies
have determined that leaded copper alloys should not
be used in potable water applications.
WARNING: Installation, wiring, and junction
connections must be in accordance with the
National Electric Code and all applicable state and
local codes. Requirements may vary depending on
usage and location.
WARNING: Installation and servicing is to be
conducted by qualified personnel only.
DANGER: Rotating machinery. Amputation or
severe lacerations can result. Keep clear of
suction and discharge openings. DO NOT insert
fingers into pump with power connected.
WARNING: Always wear eye protection when
working on pumps. Do not wear loose clothing
that may become entangled in moving parts.
DANGER: Pumps build up heat and pressure
during operation. Allow time for pumps to cool
before handling or servicing.
DANGER: Hazardous Voltage can shock,
burn, or cause death. This pump is not intended
for use in swimming pools or water installations where
human contact with pumped fluid is possible.
DANGER: Risk of electrical shock. To reduce
risk of electrical shock, always disconnect
pump from power source before handling. Lock out
power & tag.
WARNING: Do Not use these pumps in water
over 145°F. Do not exceed manufactures
recommended maximum performance, as this could
cause the motor to overheat.
Page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ion Take Control MSE50V and is the answer not in the manual?

Questions and answers

Summary of Contents for Metropolitan Industries ion Take Control MSE50V

  • Page 1 Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 1 of 8 WARNING: Risk Bronze/brass fitted pumps may contain lead levels higher than considered safe for potable water systems. Government agencies have determined that leaded copper alloys should not be used in potable water applications.
  • Page 2: Installation

    Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 2 of 8 CAUTION: Make sure lifting handles are Pump-Down Test - Be sure pump has been plugged securely fastened each time before lifting. in, lowered into the basin or sump, check the system by filling with liquid and allowing the pump to operate DANGER: Do not lift, carry or hang pump by through its pumping cycle.
  • Page 3 Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 3 of 8 • If oil is found to be clean and uncontaminated Cooling Oil Recommended Supplier/Grade (measuring above 15 KV. breakdown), refill the Enerpar SE100 housing. Conoco Pale Paraffin 22 •...
  • Page 4: Troubleshooting

    Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 4 of 8 Seal Plate - Lubricate and set o-ring in bottom of seal roubleShooting plate. Place seal plate over shaft, being sure o-ring is not twisted and in the groove. Place four capscrews through holes in motor housing and into seal plate and PUMP DOES NOT RUN AND MAKES HUMMING torque to 6.5 ft/lbs.
  • Page 5: Specifications

    Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 5 of 8 • Impeller or volute openings are fully or partially erformance clogged. Remove pump and clean. • Pump impeller is partially clogged with tar or paint, causing motor to run slow and overload.
  • Page 6 Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 6 of 8 oteS www.ionproducts.net...
  • Page 7 Ion Technologies MSE50V OPERATION MANUAL Dated: 03/30/2020 Sewage Pump Document Name: MSE50V_OM Page 7 of 8 oteS www.ionproducts.net...
  • Page 8 Page 8 of 8 Ion|StormPro 1 Year/ 18 Months Year Residential Warranty Coverage and Term. Metropolitan Industries, Inc. (“Metropolitan”) warrants to the original purchaser (the “Buyer”) of each Ion|StormPro product (the “product”), that any part thereof which proves to be defective in material or workmanship for a period of one year from date of installation or 18 months from date of manufacture, which ever comes fi...

Table of Contents