Yamaha YZ125 Owner's Manual page 107

TIP
Apply the transmission oil on the bearing, wash-
er and push rod 1.
3
2
1
8. Install:
• Push rod 2 "1"
• Ball "2"
• Push rod 1 "3"
TIP
Apply the transmission oil on the push rod 1, 2
and ball.
9. Install:
• Pressure plate "1"
10.Install:
• Clutch spring
• Clutch spring bolt
Clutch spring bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
TIP
Tighten the bolts in stage, using a crisscross pat-
G
4
5-4
tern.
11.Install:
• Dowel pin "1"
• Gasket (clutch cover) "2"
12.Install:
• Clutch cover
• Clutch cover bolt
Clutch cover bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
TIP
Tighten the bolts in stage, using a crisscross pat-
tern.
13.Install:
• O-ring "1"
New
• Clutch cable "2"
TIP
Apply the lithium soap base grease on the O-
ring.
1
CLUTCH
New
2