Dc Current Measurement (I=) - Intec ARGUS 300 Manual

3 Copper tests

3.1.9 DC current measurement (I=)

DC current measurement enables detection e.g. of feeds, emergency feeds or line termina-
tions.
The measuring range, resolution and accuracy of DC current measurement are described
in the chapter Technical data, see page 10.
After selecting the "Menu" softkey, the following settings can be made:
- Remote Kit Command
- Remote Kit
- Information Bell
You can obtain further information on the settings in the ARGUSpedia on the
instrument.
The DC measurement is always performed continuously.
34 ARGUS Copper Test Manual