Epson TM-H6000III Series Development Manual page 8

The default settings are as shown in the following table.
Item
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
2) Port information when using parallel port
The port information that can be set with the SetupPOS utility is as follows.
Item
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Item
Output buffer length [byte]
Output interval time [ms]
3) Port information when using USB port
The port information that can be set with the SetupPOS utility is as follows.
Item
Output interval time [ms]
The default setting is as shown in the following table.
Item
Output interval time [ms]
APPLICATION DEVELOPMENT GUIDE
19200
8
NONE
1
DTR/DSR
1024
2500
32 to 1024
0 to 9999
1024
2500
0 to 9999
2500
5
POSPrinter (TM-H6000III)
Version 3.00 Feb. 2019
Setting range
Setting range
Setting range
Setting range
Setting range