H/W Monitor - NOVAKON X17 Series User Manual

4.3 H/W Monitor

In this section, it allows you to monitor the status of the hardware on your
system, including the parameters of the CPU temperature, motherboard
temperature, CPU fan speed, chassis fan speed, and the critical voltage.
CPU_FAN1 Setting
This item allows users to set CPU fan 1's speed.
The default value is [Full On].
CHA_FAN1 Setting
This item allows users to set chassis fan 1's speed.
The default value is [Full On].
Case Open Feature
This item allows users to enable or disable case open detection feature. The
default is value [Disabled].
Over Temperature Protection 1
This item allows users to enable or disable the OPT 1.
Over Temperature Protection 2
This item allows users to enable or disable the OPT 2.
Page 30