Attaching/Removing nanoUIM card
• The included SIM ejector tool (sample) is required to attach/remove
nanoUIM card.
• Turn off this terminal before attaching/removing the nanoUIM card.
Attaching nanoUIM card
1
Insert the tip of the SIM ejector tool into the nanoUIM card/
microSD card tray eject hole horizontally
The nanoUIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the nanoUIM card/microSD card tray in a straight
line
3
Place the IC face of the nanoUIM card face down on the
nanoUIM card tray
• Fit the nanoUIM card securely into the nanoUIM card/microSD card
tray.
Notch
IC (Metal)
23
Getting started