Sleevoil Pillow Blocks include Modular Housings and Liner Assemblies. Modular housings include hardware, standard seals, grommets (if applicable), and oil rings.
Order two thrust collars to turn an expansion Pillow Block into a non-expansion Pillow Block (STL housings only). Thrust collars are not included and must be ordered individually.
STL Housings are longer in length than SSL Housings, and STL Housings can be used in both the expansion and non-expansion locations (if space allows). SSL Housings can
only be used in expansion locations because their shorter overall length does not allow the use of thrust collars.
These parts are assemblies that include the indented parts listed directly below them.
These parts will not fit on the 12" XC Pillow Block without modifications from the factory.
Optional bearing seals will add extra length to housings. See catalog for dimensional details.