KEF LS60 Wireless User Manual page 94

Speaker Pattern
Primary
Blinking light blue
and
and yellow
Secondary
Secondary
No LED light
Blinking white and
Secondary
blue
Primary
and
Blinking red quickly
Secondary
Primary
Blinking red and
and
amber slowly
Secondary
Status
Cable Mode is enabled and the connection
between the speakers is interrupted.
1. Make sure the inter-speaker cable is connected
between the Primary Speaker and Secondary
Speaker.
2. Make sure the inter-speaker cable is inserted
in the correct connection ports:
"(T) To P/S" on the Primary Speaker and
Secondary Speaker.
The Secondary Speaker is operating normally.
The Secondary Speaker is in the wireless pairing
mode searching for the Primary Speaker.
1. Make sure Cable Mode is disabled on the KEF
Connect app (Settings > Speaker preferences
> Cable mode)
2. On the Primary Speaker, press the (P) P/S
Pairing button once. The Primary Speaker
will search for the Secondary Speaker for
reconnection.
System error.
1. Pull the power cables from both speakers.
2. Wait approximately 60 seconds.
3. Plug the power cables back to both speakers.
4. The LED indicator of the Primary Speaker
should be pulsing amber, indicating that the
speakers are attempting to connect to the
network.
If the problem persists, please contact your KEF
dealer.
Overheat protection is activated.
94