Continuous Controllers; Soft Row Parameter/Midi Cc Map; Bank/Preset Map - Lexicon PCM92 Owner's Manual

User Bank
Internal
26

coNtINUoUS coNtRoLLeRS

All PCM92 soft row parameters can be controlled with single, 7-bit control-
lers. Each parameter is controlled with the full controller range, regardless of
the parameter range. For example, if the controller is at the midpoint of its
range (64), the parameter will also be at the midpoint of its range no matter
what the actual number.
Continuous Controllers range from 0 to 127. If the parameter range is less
than 127, then a small controller change might not result in a parameter
update. But the entire range of the parameter can still be accurately con-
trolled. In addition, if the actual range of the parameter is greater than 127,
MIDI control might be somewhat coarse. This is most noticeable with large
delays.
When MIDI is enabled, the PCM92 automatically sends MIDI messages
through the MIDI Out port for soft row parameters and preset loads when-
ever those actions are performed via the front panel controls.

SoFt RoW PARAMeteR/MIdI cc MAP

Soft Row Parameter

bANK/PReSet MAP

Type
1
Mono
2
1
Stereo
2
1
System
2
Parameter #1
Parameter #2
Parameter #3
Parameter #4
Parameter #5
Parameter #6
Parameter #7
Parameter #8
Presets
Mono User Presets 0-127
Mono User Presets 128-255
Stereo User Presets 0-127
Stereo User Presets 128-255
System User Presets 0-127
System User Presets 128-255
MIDI CC
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
MIDI Bank #
72
73
74
75
76
77