Advertisement
As for adjusting method refer to the relevant explanation in
Service Manual " ADJUSTMENT PROCEDURES OF AUDIO
PRODUCTS" .
Connect the DC supply plug to the CD-LGOOA supply + 12V by
an external DC power supply.
. Lead-in
Adjusting Point
Test Record
(Side 2)
After adjusting the lead-in position for 30 cm LP record, if
the 17 cm EP record lead-in position deviates, readjust with
t h e revels arm excentrc pin for 17 cm record. After the
adjustment, lock each one of excentric pins.
. Rotational Speed of Phono Motor
Jig
Strobo viewer
NOTE: Perform the 45 rpm speed adjustment first and them the
33 rpm speed adjustment.
ADJUSTMENT
Specified value
Adjusting Point
45 rpm: VR102
33 rpm: VRl 01
Reverse Arm
With turntable removed
Figure 3-l ADJUSTMENT POINTS
Bottom Side
Bottom Side
L - J
L - J
Front Side
Front Side
With bottom plate removed
V R 1 0 2
45rpm
33rpm
Advertisement
