Rain Delay
Suspend watering
g
Turn the dial to RAIN DELAY.
"
"
Press the UP/DOWN arrow
buttons to set the delay time for
up to 3 days (72 hours).
NOTE: Any scheduled watering
that falls within the delay period
will not occur.
Normal Operation
While set to AUTO RUN, one of the fol-
lowing screens will be displayed:
Not Watering
Screen displays the current time, the
zone that is scheduled to be watered
next, and the date and time when
watering will occur.
Watering Now
Screen displays the zone currently
being watered and the number of min-
utes remaining for that zone.
Watering
Rain Delay
Screen displays the current time and
the number of rain delay hours that are
left until regularly scheduled watering
resumes.
Current
Time
8
Seasonal Adjust
Screen displays the percentage adjust-
ment for all zones.
Delay
Season
Adjust
Error Detected
If an error is detected, the affected
zone is displayed.
Zone
Error
Next
Run
Time
Zone
Zone #
Minutes
Remaining
Delay
Remaining
All Durations
Adjusted
Error Detected Check
Wiring in Zone #
Manual Operation
Choose from two Manual
Watering options:
Water All Zones
g
Turn the dial to AUTO RUN.
"
"
Press the green WATER ALL
NOW button to start watering.
Screen displays which zone is being
watered and the number of minutes
remaining for that zone.
To stop watering the active zone and
skip to next zone, press the WATER
ALL NOW button again.
To stop manual watering, turn
g
the dial to OFF and then back to
AUTO RUN.
Water One Zone
g
Turn the dial to select a ZONE.
"
"
Press the purple WATER ONE
ZONE NOW button to start
watering (default run time of 10
minutes).
"
"
Press the UP/DOWN arrow
buttons to adjust the run time.
To stop manual watering, turn
g
the dial to AUTO RUN.
Zone
Minutes
Remaining
Zone
Minutes
Remaining