Advertisement
TA B L E O F C O N T E N T S
Special safety instructions
Important safety instructions
Warning: Obey the basic precautions for electric
products, including the instructions in this
section.
Caution: To reduce the risk of fire, connect this
EVSE only to a circuit provided with, see
Circuit breaker rating, page 29,
circuit overcurrent protection in accordance with
the National Electrical Code, ANSI/NFPA 70.
• Read all the instructions befor you use this EVSE
• Make sure that adults supervise this EVSE is when it is
used around children
• Do not put fingers into the EV connector
• Do not use this product if the flexible power cord or EV
charge cable is frayed, has broken insulation, or any other
signs of damage
• Do not use this EVSE if the enclosure or the EV connector
is broken, cracked, open, or shows any other indication of
damage
• Install an insulated grounding conductor that is identical
in size, insulation material, and thickness to the grounded
and ungrounded branch-circuit supply conductors, except
that it is green with or without one or more yellow stripes,
as part of the branch circuit that supplies the EVSE
• Connect the grounding connector of the previous bullet
point to earth at the EVSE or, when supplied by a
separately derived system, at the supply transformer
Closing requirements
1. SAVE THESE INSTRUCTIONS
≔
P R E V I O U S C H A P T E R
Table
maximum branch
←
→
N E X T C H A P T E R
9
Advertisement
