Sony XM-1ES Operating Instructions Manual page 9

Changing the heat sink cover direction
The direction of the heat sink cover can be changed
according to your preference.
1
Slide the cover forward, then lift to remove
it.
2
Rotate the cover to your desired direction.
3
Align the cover to the catches on the
amplifier, then slide the cover back until it
clicks into place.
Installing the Bass Remote
• Do not install the bass remote near a heater, in
areas that get exposed to direct sunlight or in
areas subject to high temperature.
• Avoid installing the bass remote in areas subject
to dust, dirt or moisture.
• Install the bass remote in a location where:
– There is a flat surface.
– Does not interfere with the driver's movement.
– Does not hinder the operations of the steering
wheel, shift lever or the brake pedal.
Mounting example
Installing using the mounting bracket
1
Secure the mounting bracket  to the bass
remote using the securing screws .
You can secure the mounting bracket 
horizontally or vertically to suit your needs.




9
GB