TABLE OF CONTENTS INTRODUCTION ………………………………………………………………………… PARTS OF THE CHAIR ………………………………………………………………. ATTACHING THE HEADREST …………………………………………………… CONNECTING THE GAS LIFT …………………………………………………… CONNECTING THE TOP PIECE WITH LEG ………………………………...
INTRODUCTION Welcome to the Alterseat Team and thank you altering your ergonomic experience with us. This product is manufactured and designed solely by Alterseat (M) Sdn. Bhd. We specialize in producing and manufacturing office chairs for over 20 years including other furniture.
ATTACHING THE HEADREST HEAD PIECE INSTRUCTIONS A. Using the Allen Key provided, remove the 2 screws (loosely attached) to the headrest area of the top piece. B. Align the headrest according to the 2 pilot holes and tighten the screws with the same Allen Key provided.
CONNECTING THE GAS LIFT GAS LIFT W ALUMINUM BASE Gas Lift Aluminum Base INSTRUCTIONS F. Insert the wider end of the Gas Lift into the Aluminum Base. Note: No ‘click’ sound will be heard.
CONNECTING THE TOP PIECE W LEG TOP PIECE W LEG PART Top Piece * Perform this step by slanting at an angle * INSTRUCTIONS G. Slant the ‘Top Piece’ on one side. Then insert the ‘Leg’ from a side angle to connect both segments together.
Page 8
CONNECTING THE TOP PIECE W LEG TOP PIECE W LEG PART INSTRUCTIONS H. Once both parts are successfully connected, lift your chair in an upwards and straight direction. You are now ready to sit with Alterseat!
Need help?
Do you have a question about the REVO-101 and is the answer not in the manual?
Questions and answers