Operating Interface Description - Pantum PT-B680 Series User Manual

3.4 Operating Interface Description

◼
Power on
When the printer is powered off, turn on the power switch on the back of the printer, and then the
printer turns on and the indicator lights.
◼
Power off
When the printer is powered on, turn off the power switch on the back of the printer, and both printer
and indicator turns off.
◼
Feed
1. If you press the Feed key, the printer feeds the paper to the specified paper-out position according
to the learned paper type. When you use the label paper, pressing the Feed key once will deliver a
full sheet of label.
2. When the printer is performing a print task, press the Feed key to pause its current task; at this
moment, the indicator flashes blue; then press the key again to cause the printer to perform the
incomplete task.
◼
Restore Factory Defaults
In the power-on state, click the SET key to enter the main menu, click the Down key to select the fourth
option, click the SET key again to enter the printer page, click the Down key to select the ninth Restore
Defaults option, continue to click the SET key to enter the Restore Defaults option, then click the Up
key to select State 1 SET, and finally click the SET key to save for factory defaults.
◼
Indicator Status Description
Indicator
Power
Running
Warning
Status
OFF
ON
ON
Flashing
OFF
ON
Flashing
PT-B680 Series User Manual
Indication status
Printer is powered off
Printer is powered on
Printer is in the ready state
Pause
Downloading data to the printer
Printer is in the ready state
"Printhead is open"
"Label Out", "Paper Jam", "Ribbon Out"
20