Packing List - Titan SNWBLW120 Operator's Manual

ITEM
1 PACKING RACK
2 LOCKNUT M10
3 REMOVABLE ANGLE STEEL
4 BOLT M10X20
5 REMOVABLE ANGLE STEEL

1.2 PACKING LIST

The detailed packing list as the following table 1.
ITEM
1 MAIN BODY OF THE SNOW BLOWER
2 SHEAR BOLT DRIVELINE SHAFT
HANDLE& REAR BRACKET& SCREW ROD
3
ASSEMBLY
DISCHARGE CHUTE ASSEMBLY& SNOW
4
SPRAY MASK ASSEMBLY& FITTINGS
Note
Driveline shaft shall be selected according to the power. If it is too long, please cut it to an
appropriate length. The meshing length of the sleeve shall not be less than 100 mm.
PACKING RACK LIST：
DESCRIPTION
FIGURE 3: The Snow Blower and Accessory in Package
DESCRIPTION
TABLE 1: Packing List
QTY PACKAGE FORM
1 NONE
6 CRATE ATTACHMENT
1 CRATE ATTACHMENT
6 CRATE ATTACHMENT
2 CRATE ATTACHMENT
PACKAGE
QTY.
FORM
1 NONE
1 BUBBLE FILM
1 BUBBLE FILM
1 BUBBLE FILM
7