Black Box TAB16C-LS Manual page 13

Chapter 3: Configuration and Setup
STEP 4: Now that each iPad is configured, slide the iPads into the trays within the cart, as shown in Figure 3-1.
Figure 3-1. Sliding an iPad into a tray in the cart.
STEP 5: Charge the devices.
5A. Begin plugging the syncing cables that were supplied with the cart into your iPads.
5B. Verify that the red power switch on the left side panel of the cart is in the off position. Then plug the cart power cord into a
120-VAC 15- or 20-amp power outlet.
5C. Turn the power switch located on the left side of the cart to ON.
5D. The cart will automatically begin charging the devices.
Page 13