Connecting To Passport Navigator; Connecting - Kyocera Passport PC Card User Manual

Connecting to Passport Navigator

Connecting

Navigator manages the modem's connections, which is your passport to the internet. Use Navigator to connect to the
internet, to check status, and to obtain information on your card and connection.
1. Insert your Passport PC card into the PC slot.
2. Double-click on the Passport Navigator icon on your desktop.
-or-
→
Select the
Start
3. Select your desired connection type and click the
(when you are disconnected) and "Disconnect" (when you are no longer connected).
4. Select to close Passport Navigator before you perform the
File > Exit
See "Removing Passport from the PC" on page 5.
Use the minimize button to reduce the screen size to an icon that appears in your taskbar. Double-click on the
Note:
icon to create the full-size screen again.
Connecting to Passport Navigator
→
Programs Kyocera Passport Navigator 2
→
Passport Navigator
button. Note that this button switches between "Connect"
Connect
Eject/Unplug
.
routine to remove your PC card.
7