Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dreamland F2015
Summary of Contents for Dreamland F2015
- Page 1 LUXURY HEATED THROW TYPE F2015 F2016 F2018 Instructions for use...
-
Page 2: Description Of The Appliance
9. Temperature button temperature settings or 9 hours 10. Standby display 11. On/off switch TECHNICAL DATA TYPE F2015 TYPE F2016 220-240 V 50/60 Hz 150 W 220-240 V 50/60 Hz 150 W TYPE F2018 220-240 V 50/60 Hz 150 W... - Page 3 Dear Customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and manufactured with Customer satisfaction in mind. These instructions for use are compliant with the European Standard EN 82079. INDEX Symbols page 1...
- Page 4 IMPORTANT INSTRUCTIONS. RETAIN FOR FUTURE USE. WARNING! Instructions and warnings for safe use. Before using this appliance, carefully read the instructions for use and in particular the safety notes and warnings, which must be complied with. Keep this manual together with its illustrative guide for future consultation.
- Page 5 • This appliance can work automatically at a frequency of 50 Hz or 60 Hz. • This appliance is only to be used with the types of detachable control unit that are marked on the appliance. Children under the age of three are not to use this appliance due to their inability to react to overheating.
- Page 6 2. Do not fold or bend the wired areas, as these actions could result in activating the over heat protection system. Your Dreamland Intelliheat throw is designed to FAST PREHEAT and it also responds to temperature changes in use. The digital intelliheat control has 6 temperature settings (Diagram [C] page I).
- Page 7 • READY TO RELAX temperature to pre-heat the throw • 1-5 temperatures for continuous use Connect the control connector into the throw socket then plug into the mains socket (Diagram [A]). Switch on your Intelliheat throw from the back of the control (Diagram [C] (11)), by positioning the switch ON (I).
-
Page 8: Cleaning And Maintenance
TIMER OFF/STANDBY: When the set time period has elapsed, the throw will automatically switch off and the standby light will be illuminated in blue on the (3) LED display (10) (Diagram [C]). If you wish to switch your throw back on again, press the timer button (7) (Diagram [C]) selecting either 1 or 9 hours. -
Page 9: Troubleshooting
back into shape, and into its original size. • Lay the throw flat on a clothes airer to allow it to dry completely. HANGING THE THROW OUTSIDE TO DRY • The throw must be stretched back to approximately its original size during the drying process. -
Page 10: Warranty
Problem Solution Make sure the control unit is fully plugged into the mains socket. If the leds still do not light on, The led display (3) does not light up. disconnect the plug from the mains socket and return the appliance to our Service Centre. This can be quite common and is completely You feel a tingling sensation while in use. - Page 11 we shall not be liable for any indirect or consequential loss or damage. Nothing in this guarantee or the instructions relating to the product excludes, restricts or otherwise affects your statutory rights. In line with our policy of continuous development, we reserve the right to change this product, packaging and documentation without notice.
Need help?
Do you have a question about the F2015 and is the answer not in the manual?
Questions and answers