Advertisement
Torino
Item No. 92-AE122
Aluminum Easel Assembly Instructions (page 2)
Step 5.
Before attaching the lower canvas support [C] to the
easel begin by taking [1] Knob [B] and remove T-bolt
by un-screwing from Knob. See FIG 3.
Step 6.
Insert T-Bolt through hole from the back of canvas tray.
See FIG 4. Continue by sliding flat end of T-Bolt up into
groove of center column. Complete by attaching knob
[B] to T-bolt on front of lower canvas tray. See FIG 5.
REPEAT with Upper Canvas Support, only this time
sliding T-bolt through top end of easel, similar to FIG 5.
NOTE: When needing to adjust the position of the up-
per canvas support or lower canvas tray, loosen the
knobs and move them to the desired position.
Re-tighten to secure.
Step 7.
Double check all nuts and knobs making sure all
are tightened. Your easel is now ready to use.
See FIG 6.
FIG 5
Martin/F. Weber Co., Detroit, MI USA
www.weberart.com
Email: Custservmud@aol.com
Made in China
Advertisement
