Probl Ems & S Olu Tions - Secret Lab MAGRGB User Manual

PRO B LEMS & S OLUTIONS
RE SET OPTION S
If you're experiencing any issues with your Secretlab MAGRGB
1) POWER CYCLE
Power cycle your lightstrip by unplugging it from your power outlet and then plugging it back in again.
2) BLUETOOTH
Toggle your Bluetooth off and back on. Alternatively, restart the app you're using to control
your lights or restart your device.
3) CHECK FOR POWER
Make sure that your power switch isn't turned off at the outlet or power bar.
4) PERFORM A RESET
This will delete your pairing and network information, so you will need to pair again.
Before resetting, delete your Secretlab MAGRGB
to More > My Devices > Swipe Left on your Secretlab MAGRGB
To perform a factory reset on your Secretlab MAGRGB
brightness up (+) buttons on the Controller for 5 seconds. These buttons must
be pressed simultaneously. If the reset is successful, the lightstrip will
flash white three times before going dark. It will then be ready for pairing again.
Secretlab MAGRGB Diffused LED Strip Smart Lighting Edition User Manual
™
from the Nanoleaf app by navigating
™
If you've performed all of these steps and
your issue still persists, please reach out
to our support team for further assistance.
, try these steps:
™
> Delete.
™
, hold the power and
™
Pg. 7