Asus ROG Rapture GT-AXE16000 Quick Start Manual

Quick
Start Guide
GT-AXE16000
ROG Rapture Quad-band Gaming Router
* If no 6GHz SSID is displayed, please check whether your OS and client device are fully licensed to support the newly
released 6GHz band. You can check with your OS and client device provider for Wi-Fi 6E driver release schedule.
Router Setup Steps
01
Prepare your Modem
Unplug the power of cable / DSL modem.
1
Unplug
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
configure your router.
Install your Router
02
Plug the adapter into the DCIN port, and press the Power switch.
1
– Via app
[App] On your iOS or Android mobile device, go
3
to the app store, search for ASUS Router, and
download the app.
– Or via web browser
[Wired] Connect your PC to a LAN port at
3
the back side of the router using an additional
network cable.
10GE Port WAN Type Setup Steps
01
Set up 10GE WAN connection
– Under factory defaults
Connect to the 10GE port
Connect the modem to the 10GE port with a network
cable.
Connect your modem to the
2
WAN port at the back side of the
router with the network cable
provided.
Power on the modem. Plug
3
modem to the power outlet and
power on.
Modem back
[App] On your iOS or Android mobile device, tap Settings > Wi-Fi,
4
connect to the default network SSID shown on the product label on
the back side of the router. Or scan the QR code on the product label
to connect the default network SSID.
[Wireless] Connect to the network with default SSID
shown on the product label on the back side of your
router "ASUS_XX".
Login and Connect
[ASUS Setup Wizard] Select "Manual Setting".
1
Hardware Explanations
USB
3.0 port Reset button
USB
Power (DCIN) port
2.0 port
2.5 / 1GE WAN
(Internet) port
Power
switch
1GE LAN ports
Specifications:
DC Power adapter DC Output: +19V with max 3.42A current
DC Output: +19.5V with max 3.33A current
Operating Temperature 0~40
o C
Operating Humidity 50~90%
4
Modem back
The power LED will light up when the hardware is ready.
2
5
* XX refers to the last two
digits of 2.4GHz MAC
address. You can find it
_
on the label on the back
of your ROG router.
[Wired / Wireless] Open a web browser.
4
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.
[ASUS Setup Wizard] Select "10G Ethernet", then follow the instructions
2
to complete the setup of SSID and login information.
6GHz/ 5GHz-2/
5GHz-1/ 2.4GHz
10GE LED
2.5 / 1GE LAN
10GE ports
WAN (Internet) LED
LED
Storage 0~70 o C
Storage 20~90%
Check the modem LED lights to ensure the connection is active.
Modem front
[App] Launch ASUS Router App and follow
the instructions to complete the setup.
Wi-Fi LED
Power LED
WPS button
LED button (LED Key)