Table Of Contents - Cardo Systems PACKTALK EDGE Manual
Hide thumbs
Also See for PACKTALK EDGE:
- Pocket manual (26 pages) ,
- Installation manual (16 pages) ,
- Quick setup manual (2 pages)
Need help?
Do you have a question about the PACKTALK EDGE and is the answer not in the manual?
Questions and answers
What app do I need to start my cargo?Talk back edge
The CardoConnect App is needed to start the Cardo Systems EDGE.
This answer is automatically generated
Как восстановить сопряжение двух парных устройств после сбоя
To restore pairing between two Cardo PACKTALK EDGE devices after a failure:
1. Restart the phone.
2. Perform a pairing (or factory) reset on the unit:
- Make sure the unit is in standby mode.
- Press and hold the "+" and "-" and intercom buttons together for 10 seconds until the LED flashes red 5 times.
3. Turn the unit back on.
4. Pair the unit to the phone via Bluetooth.
5. Download and install the Cardo Connect app.
6. Start the app.
7. If it still doesn’t connect, turn off the unit while the app is running, then switch it back on.
If you accidentally enter the wrong pairing mode (e.g., second phone pairing), press and hold the mobile button for 2 seconds to cancel and return to the main pairing mode. Then retry pairing.
This answer is automatically generated
Восстановление сопряжения двух парных устройств
To restore pairing between two Cardo PACKTALK EDGE devices for intercom:
1. Make sure both units are turned on and in standby mode.
2. Put the first unit into intercom pairing mode by pressing and holding the intercom button for 5 seconds until the LED flashes red and blue.
3. Repeat the same on the second unit.
4. The LEDs on both units will flash rapidly and then turn purple briefly once pairing is successful.
5. A voice message will confirm that the intercom is connected.
If pairing fails, press and hold the button again for 2 seconds to cancel and try pairing again.
This answer is automatically generated