Table of Contents
Advertisement
AP mode connection steps
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (power indicator
will be slowly flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and the power button for 5 seconds until the power indicator starts
flashing slowly.
Using AP Mode to add device
1. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
2. Select the product type from the list of options in the app (Electrical > Plug with
Energy Meter), and then select "EZ Mode" from the top-right corner when asked to
reset the device.
7
Advertisement
Table of Contents
