Remote Controller - AMC E200T User Manual

Remote Controller

1 HOME
Press HOME button, camera moves to
initial position where both pan and tilt angle
is zero.
4
2 Camera Selection Button
Used to switch among 4 cameras, press 1-4
number buttons to control cameras with 1-4
addresses respectively. For example, press
button 1 to control the camera with address
1.
3 Focus
Press "AUTO" button to switch to Auto
Focus, press "MANU" button to switch to
Manual Focus mode.
" "button to Focus Near
" "button to Focus Far
" "button to Auto Focus once every time
it is pressed, then switch back to Manual
Focus mode.
4 Iris
Press" "button to reset iris value to
default. " "button to Iris Open
" "button to Iris Close.
5 Menu
Press MENU button to enter / exit menu.
6 Data
Press DATA button to set on / off the
display of pan tilt angel, zoom times and
other prompt message.
7 Number Keys
Used to input numbers, for example, preset
number.