1. Manuals
  2. Brands
  3. UNIS Manuals
  4. Commercial Food Equipment
  5. Adda 2 GN
  6. User manual

UNIS Adda 2 GN User Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

USER'S MANUAL ADDA COLD 2 GN
Content:

1. Introduction, Intended use, Information, Safety

3. Packing, transportation, positioning and installation
4. Operation und use
6. Service, troubleshooting
1 INTRODUCTION, SAFETY
Introduction
The user's manual is intended for the use of refrigerated counter called ADDA 2 GN self-
service. Read the following instructions carefully and keep it in safe place for future
consultations
Intended use
The refrigerated counter ADDA Cold 2 GN self-service is designed for presentation and sale of
cold food, it is not aimed as 24 hours cooler. Use the counter in technically perfect conditions
in conformance with its intended use described above with observing this user's manual.
Information
The use of the cooling counter is very simple. There are controls at back side of the counter.
The counter is ready to plug in equipped with adjustable electronic controller, interior light
by each shelf, automatic defrosting and evaporation (drip tray).
Safety
There are following warning symbols used in the Manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Adda 2 GN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for UNIS Adda 2 GN

Summary of Contents for UNIS Adda 2 GN

  • Page 1 6. Service, troubleshooting 1 INTRODUCTION, SAFETY Introduction The user’s manual is intended for the use of refrigerated counter called ADDA 2 GN self- service. Read the following instructions carefully and keep it in safe place for future consultations Intended use The refrigerated counter ADDA Cold 2 GN self-service is designed for presentation and sale of cold food, it is not aimed as 24 hours cooler.
  • Page 2 In case of any unauthorised modifications and changes to the counter the manufacturer accepts no liability. 2. Technical specifications Adda 2 GN self Net Dimensions (L x W x H ) 746 x 717x 845 mm Packing dim. (L x W x H) : 87 x 83 x101 cm Netto Weight (approx.):...
  • Page 3 During transportation, positioning, cleaning and similar handling care should be taken to avoid breaking the perplex front doors. Don’t tip the front perplex glass. Positioning After positioning to final place remove protected films and taps. Position the cabinet in a safe and well arranged place.
  • Page 4 For more information about electronic control unit see manual instruction of the controller supplied with counter. Switch ON Switch on the white light switch. Switch on the green main on-off switch. The electronic controller is already programmed to store food within temperature range +2/+6°C. The automatic defrost of evaporator starts 6 hours after the cabinet has been switched on and is repeated every 6 hours (it takes 40 minutes).
  • Page 5 In standby mode the control unit displays the current temperature of the cooling area. During defrosting, the measured temperature get blocked (remains the same). After the completion, the measuring of the temperature goes back to normal mode. Locking/unlocking the controller To lock the control unit Make sure no process is running, press simultaneously for 1 seconds, the...
  • Page 6 Alarms AL – Lower temperature alarm – check the cabinet temperature, control parameter A1 (manual of controller is needed) AH – Upper temperature alarm - check the cabinet temperature, control parameter A4 (manual of controller is needed) Errors Symbol Type of failure Correction Cabinet probe error check the probe, check the...
  • Page 7 5. Cleaning and maintenance Remove the plug from the socket before any cleaning, maintenance process! Use warm water and glass cleaner for cleaning the glass surfaces (only the side and top panel are from glass). For cleaning the lift self-service doors use warm water and very fine cloth to avoid scratching. The display chase is made of stainless steel specially designed for contact with food products;...
  • Page 8 The manufacturer does not accept any liability for damage or injury cause by the failure to adhere to these regulations or by not observing the usual caution or care in actions, operation, maintenance or repair activities, even if not explicity described in this manual. The manufacturer reserves the right of future improvements/changes and therefore it may happen that your counter deviates in detail from what is described in this manual.

Table of Contents