Setup Mode - Jays s-Living Flex Getting Started, Safety And Warranty

SETUP MODE

Setting up your speaker
"Wi-Fi setup mode" or "Bluetooth pairing mode" is needed for either connecting the speaker to a Wi-Fi network or connecting a new Bluetooth
device to the speaker.
• For "Wi-Fi setup", the speaker will automatically enter "setup mode" if the previous connection cannot be established. But even though
the speaker is already connected to a Wi-Fi network you can manually force this "mode" by pressing the "pairing button" (Wi-Fi symbol)
for 3 seconds. Note: The speaker must be in "Wi-Fi mode" first. Forcing this setup mode will only enable Apple setup mode (WAC).
• For "Bluetooth pairing mode" (if you need to pair a new Bluetooth device with your speaker), you need to press the "pairing button"
(Wi-Fi symbol) for 3 seconds. Note: The speaker must be in "Bluetooth mode" first.
Reset speaker / disable wireless connections: The speaker can be reset to factory defaults by pressing and holding "pairing button" (Wi-Fi
symbol) for 6 seconds. This will clear all speaker settings and afterwards it will be ready for Wi-Fi setup again. A reset will also disable all wireless
connections.
10
Purple LED – "Wi-Fi mode" Blue LED – "Bluetooth mode"