Download Print this page
Seconique Monaco 4 Assembly Instructions Manual

Seconique Monaco 4 Assembly Instructions Manual

High end bed

Advertisement

Quick Links

SEC/SH/11/18/DC2
51956
MONACO 4' HIGH END BED
ASSEMBLY INSTRUCTIONS
!
DO NOT
USE
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned
for any reason.
and the product.
We strongly recommend that you keep children away from your work area.
Never drag or push products as this could cause damage to the joints making it inferior.
Do not drag or push items across your furniture as this may cause the surface to scratch.
Do not place this product next to a radiator or in direct sunlight.
Wood is a natural product and may expand if subjected to damp and may shrink or crack if
subjected to heat. Therefore it is recommended that room temperature is maintained, with no
Do not place hot or chilled items directly on to the surface, use a place mat or marking will
occur.
out.
PAGE 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Monaco 4 and is the answer not in the manual?

Questions and answers

Summary of Contents for Seconique Monaco 4

  • Page 1 SEC/SH/11/18/DC2 51956 MONACO 4' HIGH END BED ASSEMBLY INSTRUCTIONS DO NOT IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
  • Page 2 SEC/SH/11/18/DC1 The RED colour indicates the left component X X X Parts Please Note: The below highlighted parts have been colour coded Headboard panel to help identify them during assembly. Siderail Slats (2 holes) Headboard right Slats (3 holes) Headboard left t (red) Centre Rail Footboard panel...
  • Page 3 SEC/SH/11/18/DC1 Ø8 x 0mm Ø7 x 100mm 17mm PAGE 3...
  • Page 4 SEC/SH/11/18/DC1 Ø1/4 x 110mm 17mm FOR YOUR FUTURE REFERENCE ORDER NUMBER SHOULD BE HERE Ø4,0 x 16mm PAGE 4...
  • Page 5 SEC/SH/11/18/DC1 Ø7 x 90mm 17mm Ø1/4 x 60mm 17mm The use of power tools to assemble this product will invalidate any claim and may damage this product making it unsafe!!! PAGE 5...
  • Page 6 SEC/SH/11/18/DC1 Ø3,5x30mm Ø4,0 x 30mm PAGE 6...