Keurig B31 Owner's Manual page 11

11
Lower the Brewer Handle completely
and firmly to close.
Ensure all of the water has left
the Cold Water Reservoir and
drained into the Brewer before
lowering the Brewer Handle.
There is extremely hot water in the K-Cup Holder during the brew process. To avoid risk of
CAUTION:
injury, do not lift the Brewer Handle or open the K-Cup Assembly Housing during the brewing process.
12
The BREW Button will flash blue.
Press the BREW Button. It will then
flash red while the water is heating,
and turn solid red when brewing
begins.
2 Min
13
The water will reach the correct
temperature in approximately
2 minutes. The BREW Button will
turn solid red and your beverage
will start to dispense.
11
14
If you are performing an initial
cleansing brew, discard the water
from the mug and begin at Step 4 to
brew your first beverage.
if you have previously completed an
initial cleansing brew, enjoy your
beverage.
Your Brewer is now ready for
the next beverage. Begin the
process again, adding fresh
water and a new K-Cup.