Related Manuals for Crosby Clamp-Co BG-9000
Summary of Contents for Crosby Clamp-Co BG-9000
- Page 1 BARRIER GRAB CLAMP USERS MANUAL Model Numbers: BG-9000 IMPORTANT Make certain all persons that may use, inspect, or maintain this equipment carefully read and understand this manual. Retain this manual in a permanent file.
- Page 2 Warning and Operating Procedure Labels. Crosby Clamp-Co barrier grabs have been safely and successfully used in the field for years. Your safe use of our products depends on you. Please be responsible and make sure all people using our products follow these simple rules.
- Page 3 6 feet or (1.8 m). NEN-EN 13155 requires a secondary positive holding device (e.g., sling, net, cage) for lifts exceeding 6 feet or (1.8 m). • Read, understand, and follow these instructions and the product safety information. Copyright© 2009 The Crosby Group All Rights Reserved...
- Page 4 Do not use barrier grab to drag or pull the barriers. • The Crosby Clamp-Co barrier grab is not designed to be used in tandem with another grab through use of a double leg sling, spreader beam, or other equipment.
- Page 5 Figure 4 relaxed. This will allow the grab to index to the open position (See Figure 4). The barrier grab can now be lifted away from barrier. Copyright© 2009 The Crosby Group All Rights Reserved...
- Page 6 • If provided with hardened steel pads, rather than polyurethane, check for wear and replace if worn. Replace with genuine Crosby Clamp-Co hardened steel grip pads. • Lubricate index pin assembly, load pins and moving parts with oil can or spray at least once a week.
- Page 7 Are the Working Load Limit, Serial Numbers and Warning labels legible? • Have all inspections and maintenance been regularly recorded? • Does the Crosby Clamp-Co product carry its original Identification Plate and Warning Information? • If the identification plate has been damaged or removed, the clamp shall be taken out of service and arrangements made to replace the identification plate.
- Page 8 P.O. Box 3128 Tulsa, Oklahoma 74101 (918) 834-4611 www.thecrosbygroup.com stock # 9999277 Copyright® 2009 The Crosby Group, Inc. All Rights Reserved...
Need help?
Do you have a question about the Clamp-Co BG-9000 and is the answer not in the manual?
Questions and answers