Toshiba ML-EC42P Instruction Manual page 19

COUNTERTOP INSTALLATION
Remove all packing material and accessories. Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provide enough open space for the intake and/or outlet vents.
A minimum clearance of 3.0 inches (7.5cm) is required between the oven and any adjacent walls.
One side must be open.
The minimum installation height is 3.0ft(91.4cm).
a. Leave a minimum clearance of 12 inches (30cm) above the oven.
b. Do not remove the legs from the bottom of the oven.
c. Blocking the intake and/or outlet openings can damage the oven.
d. Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV reception.
3.0 inches
(7.5cm)
>3.0ft
(91.4cm)
2. Plug microwave oven into a standard household outlet. Be sure the voltage and the frequency
is the same as the voltage and the frenquency on the rating label.
• Do not install oven over a range cooktop
or other heat-producing appliance.
If installed near or over a heat source, the
NOTE
oven could be damaged and the warranty
would be avoid.
12 inches(30cm )
3.0 inches
(7.5cm)
The accessible surface may be
hot during operation
Open
16
DISTANCE
SIDE
(INCHES/CM)
Top
12 inches/30cm
Left 3.0 inches/7.5cm
Right
Open
Behind
3.0 inches/7.5cm
Open
Front