Maddox MC21-1 Owner's Manual
  1. Manuals
  2. Brands
  3. Maddox Manuals
  4. Service Equipment
  5. MC21-1
  6. Owner's manual

Maddox MC21-1 Owner's Manual

21 pc. front wheel drive bearing remover & installer kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
2021 by Harbor Freight Tools
©
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
. All rights reserved.
®
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22a
63728

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC21-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Maddox MC21-1

Summary of Contents for Maddox MC21-1

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Specifications

    Specifications 2.17 in., 2.32 in., 2.48 in., 2.62 in., 2.76 in., Bushing Range 2.81 in., 2.87 in., 2.89 in., (Outside Diameter) 2.95 in., 3.05 in., 3.21 in., 3.27 in., 3.48 in. 3 in. O.D. x 2.56 in. Long Sleeve Size 3.4 in.
  • Page 3 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Bearing Removal From Rear of Knuckle 1. Choose an appropriate sized Plate (001 or 002), 3.

  • Page 4: Hub Installation

    Bearing Installation from Rear of Knuckle 1. Choose an appropriate sized Plate 3. Clean inside of knuckle. (001 or 002) and Bushing (1-13). 4. Place Washer, Bushing and New Bearing 2. Use Bolt (19), two Washers (20) and Nut (16). (not included) onto Bolt.

  • Page 5: Application Chart

    Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 6 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 7 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 8 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 9 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 10 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.
  • Page 11 Application Chart Use application chart to determine appropriate sized bushings, plates, and sleeves for your vehicle. Note: Numbers below are identified in the Parts List and Diagram on page 14 and page 15. Key: NA: Tapered bearing and race, replace hub assembly, shop press required or your application has solid rear axle.

  • Page 12: Maintenance

    Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1.
  • Page 13 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 14: Parts List

    Parts List and Diagram Parts List Part Description Note: O.D.=Outer Diameter Bushing, 2.76 in. O.D. Part Description Bushing, 2.62 in. O.D. Small Sleeve Plate Bushing, 2.48 in. O.D. Large Sleeve Plate Bushing, 2.32 in. O.D. Bushing, 3.48 in. O.D. Bushing, 2.17 in. O.D. Bushing, 3.27 in.
  • Page 15 Diagram 63728 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

63728

Table of Contents

Save PDF