Carrier Access Network Device Axxius 800 User Manual page 93

3. Set the following on this screen:
4. Select
Create a Remote Axxius Profile for all Remotes
1. Select RemoteUnit WAN <Setup > from the Profile Directory main
Axxius 800 - Release 2.2
Select the IP Protocol Eth II (X), all others should not be selected.
Set the LAN Networks Updates for IP and IPX to < Neither >.
Set the LAN IP Address to 192.168.201.101 (Router IP Address) along
with the Subnet Mask of 255.255.255.0.
[E ]
to exit menu and <Yes> to save changes.
SC
[E
window and select
Setup of DS0 Management Channel
]
.
NTER
Configuration
4-21