Add (Router) Dhcp Server Option - Carrier Access Network Device Axxius 800 User Manual

CLI Commands
add

add (router) dhcp server option

Use the add (router) dhcp server option command to add optional DHCP server
attributes that will be advertised every time a DHCP client discovery is initiated. This
provisioning takes effect immediately and can only be performed when the DHCP
server is enabled.
Syntax:
Example:
{rtr_card-addr} - The slot number (1-8) that contains the Router (TSR) card.
{tag} - Range is 1-254. Options tags are unique, duplicate numbers will be rejected. To
change an option with the same tag, the old option must be deleted and then the new
option re-entered. 0 = off. Reserved numbers 6, 15, 44, 46, 47, 50, 51, 53, 54, 61.
{settings}
{true/false}
{byte1|byte2|byte4} {value}
{"string"}
{ip-addr} [ip-addr] [ip-addr]
[ip-addr]
5-8
add {rtr_card-addr} dhcp server option {tag} {setting}
add 2 dhcp server option 19 false
add 2 dhcp server option 13 byte1 200
add 2 dhcp server option 160 byte2 3200
add 2 dhcp server option 170 byte4 0xFEDCBA98
add 2 dhcp server option 12 "www.carrieraccess.com"
add 2 dhcp server option 150 192.168.0.33
add 2 dhcp server option 150 192.168.0.33 10.40.1.1
20.0.0.1 100.150.3.97
Boolean uses true or false
byte1 = send value in 1 byte
byte2 = send value in 2 bytes
byte3 = send value in 4 bytes
value = any numeric value.
Unidentified with a maximum of 50
characters, enclosed in quotes.
IP address in the form xxx.xxx.xxx.xxx,
where xxx is a number from 0 to 255.
Axxius 800 - Release 2.2