Craftsman CMXGWAS021023 Operator's Manual page 10

Operation
4 . Firmly grasp spray gun with both hands, point spray
gun in safe direction, press trigger lock and depress
trigger to begin spraying .
5 . Apply high pressure spray to a small area first, then
check the surface for damage . If no damage is found,
it is okay to continue cleaning .
WARNING! Risk of electrocution . Contact with
power source could cause electric shock or burn
resulting in death or serious injury . Never spray
near power source .
Usage Tips
• For most effective cleaning, keep spray tip 8 to 24 in
(20 to 61 cm) away from cleaning surface .
• Do not use high pressure spray tips closer than 6 in (15
cm) to prevent damage to the cleaning surface .
• Start at the top of the area to be rinsed, working down
with long, even, overlapping strokes .
10
Step 6: Applying Detergent
WARNING! Chemicals could cause burns resulting
in death or serious injury .
• Follow chemical manufacturer's label instructions for
proper use and handling of the chemical .
• Only use products marketed for use with pressure
washers .
• Never spray flammable liquids .
Check Detergent Siphoning Tube / Tank
Clean detergent tube if clogged or replace if leaking .
To apply detergent, follow these steps:
To apply undiluted detergent using direct from concentrate
follow these steps .
1 . Attach blue siphon hose to the direct from
concentrate bottle and pump .
2 . Install black detergent spray tip . See Spray Tips .
3 . Apply per manufacturer's instructions .
NOTICE Use provided standard detergent siphon tube to
apply standard detergents . Prepare per pressure washer
detergent manufacturer's instructions . Install the detergent
siphon tube and insert into pressure washer detergent .
NOTICE Detergent cannot be applied with the high
pressure spray tips (White, Green, Red or Cyan) .
Craftsman.com