Taillamps, Turn Signal, Sidemarker, Stoplamps, And Back-Up Lamps; (Uplevel) - Buick Encore GX 2023 Owner's Manual

4. Remove the old bulb from the bulb
socket by pulling it straight out.
5. Insert a new bulb into the bulb socket.
6. Install the bulb socket into the taillamp
assembly.
7. Install the taillamp assembly to the
vehicle body with the two screws.
Rear Back-Up Lamp
The bulbs are accessible from the underside
of the vehicle.
1. Turn the bulb holder anti-clockwise and
remove it from reflector.
Vehicle Care
2. Disengage the bulb socket from the plug
connector by pressing the retaining lug.
3. Remove and replace the bulb socket with
bulb and attach the plug connector.
4. Insert the bulb socket into the reflector
and turn clockwise to engage.
Taillamps, Turn Signal,
Sidemarker, Stoplamps, and
Back-Up Lamps (Uplevel)
Caution
Improper lamp assembly removal and
installation can cause leaks and water
intrusion which may cause damage to
277
(Continued)