- INSTALLATION
Connection antenna
Connect your dish to LNB IN
Using HDTV cable
For digital television, it is recommended to connect using an HD cable.
In case the TV has an input HD connector, it is advisable to use it to get a better image quality.
Using RCA cable
If no HD input on your TV-set, then can connect STB to TV-set using the RCA cable.
- START USING
Switch ON STB
Plug the STB power adapter into an electrical outlet.
Press the power button located on the remote control.
First installation and channels search
The first time you turn on the receiver, you will see the First install menu:
In this menu, you can select the menu language and go to the antenna setup: