Operating instructions / Technical data
This document describes the function and installation of wall heating panels and
provides important information for safe handling during installation and initial
operation. Do not start the installation before you are sure that you have technically
understood the instructions and only carry out the work in the correct order given in
these instructions!
Intended use
The wall heating element type WHE described in this document is an electrically
operated infrared panel for indoor use. The wall heating element may only be
operated in connection with a temperature limiter (external thermostat). In order to
comply with the eco-design guidelines, a room thermostat with a built-in weekly
programme and "window open detection" is ideally recommended.
Any other use than described above is not permitted and can lead to danger or
destruction of the heating system. If you are unsure, contact the supplier or
manufacturer for further information.
Technical data:
Dimensions: 1100 x 200 x 20 (30*) mm
Power: 170 W ± 10%
Protection class: I Protective earth
Protection class: IP 20
Power consumption: 1.3 A
Connection: 3 m ribbon cable and plug
Colour: white
Weight: approx. 1.9 kg
* Unit depth including wall spacers
Where you must not use the wall heating panel:
-
Wall heating panels are not intended for outdoor use or for use in wet rooms,
such as bathrooms, showers and similar wet places.
Wall heating panel WHE 170